Try our Frames Site, if your browser supports it - it loads much faster.

 

HOW TO PROGRAM THE ICOM IC-F4SR EASIWAVE

 

SET MODE PROGRAMMING

The SET MODE allows the user to select settings for functions which only require occasional adjustment.

SET MODE is accessed by pushing [UP] and [?] together and switching the power ON. The display shows the function on the left and the setting on the right. To exit SET MODE turn the power off.

DISPLAY FUNCTION DESCRIPTION DEFAULT SELECTIONS
PS Power Saver The power saver function reduces the current drain to conserve battery life. ON ON, OFF
BE Confirmation Beeps You can select silent operation by setting beep tones OFF or you can select the confirmation beep sound when a button is pushed by setting beep tone ON. The beep volume is linked to the [VOL] control. ON ON, OFF
LI Backlight Timer The transceiver has a display backlight. You can select a 5 or 10 second period that the backlight will illuminate when a key is pressed. To prevent backlight illumination select OFF. For continuous illumination set the backlight function to ON. 5 OFF, 5, 10, ON
L0 Transmit Lockout The transmit lockout function prevents transmission while receiving a signal. OFF OFF, BUSY
MC Microphone Control The HM-75A microphone can remotely control some functions. To allow remote control set microphone control ON. To prevent remote control set microphone control OFF OFF ON, OFF
T0 Tone Display The transceiver can display CTCSS tones and DTCS codes using a 2 digit reference number. To display reference numbers select NUM. To display Tone frequency and DTCS code select CODE. CODE NUM, CODE
AR Auto Reset Timer Auto reset time is the period before the auto channel function restarts after a busy signal disappears and in which no operation is performed. Select the pause time required. 5 OFF, 5 to 60 in 5 sec.steps
RT Ringer Timer Ringer time is the minimum signal transmission time when the auto channel function is in use. Select the ringer time required. 2 0 to 16

Other functions can also be programmed.

Ringer Pattern

To select a different ringer pattern push [DOWN] and [MUSIC] and turn power ON. Turn the power off to exit ringer pattern mode and save selected pattern.

DISPLAY FUNCTION DESCRIPTION DEFAULT SELECTIONS
RG Ringer Pattern 10 ringer patterns are available 3 1 to 10

My Name

To change the programming 'My Name' display push [UP] and [MUSIC] and turn the power ON. Push [MUSIC] for 2 seconds to exit 'My Name' programming mode and save the selected comment.

DISPLAY FUNCTION DESCRIPTION DEFAULT SELECTIONS
_SRBR My Name 7 character positions can be programmed. Available characters are A to Z, 0 to 9, [,], -, /, and space. Push [MUSIC] to advance the cursor. SRBR n/a

 

 

Send mail to
mike@mwc.co.uk
with questions or comments about this web site.
Last modified: February 09, 2006