HAD9728 HAD9338 HAD9742
NAD6502 NAE6521 NAE6522
Also available
HAD9728 - Tunable Antenna Kit 136-174 MHz (198mm) HAD9743 VHF Stubby Antenna 162-174 MHz (80mm)
HAD9338 - VHF Heliflex Antenna 1 36-162 MHz (151mm) NAE6483 UHF Whip Antenna 403-520 MHz (166mm)
HAD9742 - VHF Stubby Antenna 146-162 MHz (91mm) NAE6523 UHF Heliflex Antenna 470-520 MHz
NAD6502 - VHF Heliflex Antenna 146-174 MHz (148mm)
NAE6521 - UHF Heliflex Antenna 400-440 MHz (77mm)
NAE6522 - UHF Stubby Antenna 462-470 MHz (73mm)
HLN9017 HLN9720 HLN9008 HLN9009
HLN9978 HLN9970 HLN8411
HLN8412 HLN9011 HLN9985
HLN9017 - Nylon Carry Case for fully approved FM 1200 mAh Battery
HLN9720 - Standard Leather Carry Case with Belt Loop
HLN9008 - Leather Carry Case with Belt Loop for fully approved FM 1200 mAh Battery
HLN9009 - Leather Carry Case with Swivel for fully approved FM 1200 mAh Battery
HLN9978 - Standard Leather Display/Keypad Carry Case with Belt Loop
HLN9970 - DTMF Standard Leather Carry Case with Belt Loop
HLN8411 - DTMF Standard Leather Carry Case with Swivel
HLN8412 - DTMF LCD Standard Leather Carry Case with Swivel
HLN9011 - DTMF Leather Carry Case with Swivel for fully approved FM 1200 mAh Battery
HLN9985 Weather proof bag
HMN9725 HMN9787 BDN6647 BDN6648
BDN6646 HLN8096
HMN9727 HMN9752 HMN9754
BDN6774
Also available
HMN9725 Remote Speaker Microphone
BDN6720 Flexible ear receiver-earpiece without volume control
HMN9787 Headset with Swivel Boom Microphone
BDN6706 Ear Microphone with VOX interface
BDN6647 Medium Weight Headset with Boom Microphone
BDN6648 Heavy Duty Headset with Noise Cancelling
Boom Microphone with PTT button
BDN6646 Ear Microphone with PTT Interface
HMN9752 Earpiece with Volume Control
HMN9727 Earpiece without Volume Control
HMN9754 2 piece Surveillance Microphone
HLN8096 Audio Accessory Security Clamp
Chargers
HTN9804/HTN9805 HTN9802/HTN9803
HTN9811/HTN9812 HLN9944
HTN9802 220 Volt 1 Hour Rapid Rate Charger
HTN9804 220 Volt 10 Hour Standard Rate Charger
HTN9811 220 Volt 6 Unit - 1 Hour Rapid Rate Charger
HTN9803 240 Volt 1 Hour Rapid Rate Charger
HTN9805 240 Volt 10 Hour Standard Rate Charger
HTN9812 240 Volt 6 Unit - 1 Hour Rapid Rate Charger
HLN9944 Wall Mounting Bracket for Multi-Unit Charger
HNN9701 HNN9808
Also available
HNN9701 -1200 mAh Fully Approved Factory Mutual Battery HNN9628- 1200 mAh Standard Battery
HNN9808 -600 mAh Fully Approved Factory Mutual Slim Battery HNN8133- 1200 mAh Limited Factory Mutual Battery HNN8308- 600 mAh Slim Battery
Carry Accessories
HLN9076 HLN8414 HLN9724
HLN8255 HLN8052 NTN5243
HLN9015 HLN9035 HLN9149
Also available
HLN9076 -Standard Moulded Carry Holder with Belt Clip HLN9873 Standard Leather Carry Case with Swivel
HLN8414 -Chest Pack Carry Holder HLN9721 Slim Leather Carry Case with Belt Loop
HLN9724 -Replacement 2.5" Belt Clip HLN9084 Replacement Strap for moulded Carry Holder
HLN8255 -Spring Action 3' Belt Clip HLN9750 Standard Nylon Carry Case
HLN8052 - Wrist Strap TDNIO02 Swiveller, includes Holster, Belt and Strap
NTN5243 -Shoulder Strap for use with all Carry Cases TDN1003 Replacement Swiveller Button
HLN9015 - Replacement Strap for leather Carry Cases NTN5629 Replacement Swivel 3" Belt Loop
HLN9035 -Replacement Swivel 2.5' Belt Loop HLN9973 Replacement Strap for Leather Carry Case
HLN9149 -Swivel Belt Loop Adapter HLN9974 Replacement Strap for Nylon Carry Case
HLN9975 Replacement Strap for DTMF Carry Case
HLN9018 Replacement Strap for Leather Carry Cases
used with 1200 mAh FM Battery
HLN9019 Replacement Strap for Nylon Carry Cases
used with 1200 mAh FM Battery
UNIVERSAL AND USER-FRIENDLY BATTERY
MAINTENANCE FOR MOTOROLA AND
MAG 1 TWO-WAY AND CELLULAR BATTERIES.
The Motorola Battery Maintenance System (BMS) is all you need to insure top performance from all your nickel cadmium batteries. Proper battery maintenance is important for two reasons: One, knowing the delivered capacity of a battery assures that it is capable of providing the right amount of energy for a specific application. Two, checking a battery for faults such as shorted or reversed cells saves you servicing time on a good radio. The six-station and three station Battery Maintenance Systems interface with many nickel cadmium batteries via interchangeable battery adapters (available separately) for added system customization.
Microprocessor-controlled maintenance functions include CHARGE (default activated), DISCHARGE, ANALYZE and CONDITION. Each function is completed with a final battery charge. Upon full-charge detection, a continuous rnaintenance charge is delivered until the battery is removed so ft is ready for use. Each of the battery stations consists of a battery well, an LCD information center and function buttons. A plug-in battery adapter can be installed in each battery well. The adapter analyzing system allows you to customize a system to identify the battery adapter connected in each battery well. The LCD information center displays battery voltage, current and maintenance status. Plus the BMS determines when there is a battery fault and displays a BAT.Fault message. Three easy-to-use function buttons are labeled with symbols and activate battery maintenance. The shaded lightning bolt represents charging (filling the battery) and the unshaded lightning bolt represents discharging (emptying the battery). Discharge is complete when the battery reaches one volt per cell.