|
SET MODE PROGRAMMING
The SET MODE allows the user to select settings for functions which only require occasional adjustment.
SET MODE is accessed by pushing [UP] and [?] together and switching the power ON. The display shows the function on the left and the setting on the right. To exit SET MODE turn the power off.
| DISPLAY |
FUNCTION |
DESCRIPTION |
DEFAULT |
SELECTIONS |
| PS |
Power Saver |
The power saver function reduces the current drain to conserve battery life. |
ON |
ON, OFF |
| BE |
Confirmation Beeps |
You can select silent operation by setting beep tones OFF or you can select the confirmation beep sound when a button is pushed by setting beep tone ON. The beep volume is linked to the [VOL] control. |
ON |
ON, OFF |
| LI |
Backlight Timer |
The transceiver has a display backlight. You can select a 5 or 10 second period that the backlight will illuminate when a key is pressed. To prevent backlight illumination select OFF. For continuous illumination set the backlight function to ON. |
5 |
OFF, 5, 10, ON |
| L0 |
Transmit Lockout |
The transmit lockout function prevents transmission while receiving a signal. |
OFF |
OFF, BUSY |
| MC |
Microphone Control |
The HM-75A microphone can remotely control some functions. To allow remote control set microphone control ON. To prevent remote control set microphone control OFF |
OFF |
ON, OFF |
| T0 |
Tone Display |
The transceiver can display CTCSS tones and DTCS codes using a 2 digit reference number. To display reference numbers select NUM. To display Tone frequency and DTCS code select CODE. |
CODE |
NUM, CODE |
| AR |
Auto Reset Timer |
Auto reset time is the period before the auto channel function restarts after a busy signal disappears and in which no operation is performed. Select the pause time required. |
5 |
OFF, 5 to 60 in 5 sec.steps |
| RT |
Ringer Timer |
Ringer time is the minimum signal transmission time when the auto channel function is in use. Select the ringer time required. |
2 |
0 to 16 |
Other functions can also be programmed.
Ringer Pattern
To select a different ringer pattern push [DOWN] and [MUSIC] and turn power ON. Turn the power off to exit ringer pattern mode and save selected pattern.
| DISPLAY |
FUNCTION |
DESCRIPTION |
DEFAULT |
SELECTIONS |
| RG |
Ringer Pattern |
10 ringer patterns are available |
3 |
1 to 10 |
My Name
To change the programming 'My Name' display push [UP] and [MUSIC] and turn the power ON. Push [MUSIC] for 2 seconds to exit 'My Name' programming mode and save the selected comment.
| DISPLAY |
FUNCTION |
DESCRIPTION |
DEFAULT |
SELECTIONS |
| _SRBR |
My Name |
7 character positions can be programmed. Available characters are A to Z, 0 to 9, [,], -, /, and space. Push [MUSIC] to advance the cursor. |
SRBR |
n/a |
|